Fuji S3 Pro

1. Place the camera in manual focus mode.

2. Make sure your camera is in "P", "S", "A" or "M" mode not green auto. If using "M" mode be sure to properly set the exposure.

3. Push the "Menu" button.

4. Scroll to "Custom WB" setting.

5. Press the right arrow to get ready to take a custom white balance.

6. Remove The Color Parrot from the included base plate.

7. Hold The Color Parrot over the front of the lens. (Be sure to place the side with the smaller white circular target towards the camera lens.)

8. Point the camera lens at your subject(s) of interest, or the light source(s) illuminating your subject(s) of interest.

9. Take 1 photo.

10. Should say "Completed." Press "Menu" to confirm this white balance setting.

11. Start taking photos. Repeat steps 1-10 as needed (whenever the light source changes, or you change locations).

You may also wish to download the PDF Manual Here and go to page 104 for full instructions on custom white balance options for your camera.